Rainbow Vacuum E2 Type 12 & E-2 e SERIES Main Housing Parts

Airflow adaptor for the E2 Type 12 (Black, Silver, e2 Gold), and E-2 (e SERIES™) model Rainbow. The airflow adaptor helps reduce a whistle noise that could be created while running the Rainbow without a hose connected. R8516 and...

Small applique for the left side of the main housing on the E2 Type 12 (e2 Gold) version Rainbow. Be sure to understand the left housing from the right as this will on fit the one side. The schematics page can help you find the correct...

Small applique for the right side of the main housing on the E2 Type 12 (e2 Gold) version Rainbow. Unique to the side of the housing and is not a universal item.

Left baffle assembly for the E2 Type 12 (Silver, e2 Gold), and E-2 (e SERIES™) main housing assembly. Includes the R7141 latch spring, R7139 latch pin, and the R8063 latch. Obsolete item number is R7280 and may be stamped behind...

Right baffle assembly for the E-2 (e SERIES™) and the E2 Type 12 (Silver, e2 Gold) main housing that stores the separator wrench / brush. Does not fit the Black series (E2 Type 12) version. Includes the R7141 latch spring, R7139...

Left baffle plate for the E2 Black (E2 Type 12) version Rainbow. Does not include the latch or spring. Be careful when removing this part from the main housing as it has a switch and plunger that can easily fall out.

Exhaust vent plate for the model E2 Type 12 (Silver, e2 Gold) and E-2 (e SERIES™) Rainbow. This part has been improved over the years by first adding a cord wrap hook and then adding an opening behind the cord wrap hook to allow for...

The interlock switch harness connects the power cord, the power cord harness, and the interlock switch all together on the E2 Type 12 Rainbow system.

Factory OEM latch sub-assembly for the E2 Type 12 (Silver, e2 Gold), and E-2 (e SERIES™) version Rainbow models. Does not color match the Black series (E2 Type 12). Original production had an R7137 and/or R7138 stamped on the inside....

Latch pin that fits the E2 Type 12 (Black, Silver, e2 Gold), and E-2 (e SERIES™) version Rainbow systems. One side is rough, and the other side is smooth. Use a small hammer and punch to hit the smooth side to remove. The rough side...

Latch pin spring that fits the E2 Type 12 (e2 Black, Silver, Gold), and E-2 (e SERIES™) version Rainbow systems. This part helps keep the latches up out of the way to prevent latch from hooking the water pan when trying to remove...

Plastic strain relief support that fits the E-2 (e SERIES™), D4C SE (Special Edition), and D4C Rainbow. Also is used in the PN-2E and PN-2 power nozzle.